2HF Fibreglass Boat Restorer Kit

Description

Peak Chemicals 2HF Fibreglass Boat Restorer Kit. Proudly 100% Australian Made and Owned.

Small Kit Includes:

1 x 2HF Fibreglass Boat Deoxidiser – 1 Litre

1 x 2HF Restore and Seal Marine Cut & Waxes 300ml

1 x 2HF Final Finish Marine Waxes – 300ml

Large Kit Includes:

1 x 2HF Fibreglass Boat Deoxidiser – 1 Litre

2 x 2HF Restore and Seal Marine Cut & Waxes 300ml

2 x 2HF Final Finish Marine Waxes – 300ml

About our 2HF Fibreglass Boat Restorer Kit:

Bring your fibreglass surface back to new again with our DIY friendly, 3 step system. Our kit can be used on fibreglass boats, caravans, horse floats, and any other fibreglass surface.

Step 1/2HF Fibreglass Boat Deoxidiser – This step eliminates yellow staining on the boat hull/fibreglass surface caused by oxidisation and removes surface contaminants preparing the surface for polishing using step 2 and 3 (see below.)

Our 2HF Fibreglass Boat Deoxidiser:

• Gel formula clings to the surface, eliminating yellow staining with ease!
• Is DIY Friendly and very easy to use – just sponge on and rinse off!
• Works on all fibreglass surfaces including boats, caravans and horse floats.
• Contains no harsh acids, no hydrochloric or phosphoric acids here!
• Will not damage, and is safe to be used on all fibreglass, gelcoat, stainless steel, painted and aluminium marine surfaces, plexiglass, rubber, plastics, decals and deck areas.

Our 2HF Deoxidisers gel formula clings to fibreglass surfaces, eliminating yellow stains with ease. Removes built up surface contaminants, preparing the surface for polishing using step 2 and 3 (see below.)

Application: Our 2HF Deoxidiser is very easy to use, just sponge on our deoxidiser, (using a sponge will make a litre go a long way), and rinse off. Dry surfaces prior to polishing with step 2 and 3.

Step 2/2HF Restore and Seal Marine Cut & Wax – This polishing step restores chalky gelcoat back to new again.

Restores chalky gelcoat back to it’s original shine, gloss and smoothness. Contains high quality, durable waxes providing long lasting results in marine environments. It is also great for rejuvenating your gunnel rubber and removing jetty marks.

Application: Treat the surface with and rinse off step 1 (2HF Deoxidiser) prior to polishing the surface. Apply a small amount of 2HF Restore and Seal Marine Cut & Wax to either a soft cloth or mechanical buffer. Rub/Buff  the surface in small, manageable sections until the product is removed from the surface and gloss is restored. Do not allow product to dry during application.

Step 3/2HF Final Finish Marine Wax: Use this polish as a final step to seal off gelcoat and add an extra high shine, protective wax to the surface.

Using this final step adds a long lasting, protective wax coating to the surface. Contains high quality, durable waxes providing long lasting results in marine environments. This wax is great for use on painted surfaces and windows too. Great for use on painted surfaces and windows too.

Application: Apply a small amount of 2HF Final Finish Marine Wax to either a soft cloth or mechanical buffer. Rub/Buff the surface in small, manageable sections until the product is removed from the surface and gloss is restored. Do not allow product to dry during application.

Required Amount:

A small kit will do up to a 21ft boat.

About Us:

We have been manufacturing in Melbourne for over 15 years.

CUSTOMER REVIEWS:

“My boat has had about a year of yellow waterline stains on it (it’s a 10 year old Haines Hunter that spends its life in the water. I use it most days to get to work. I have tried acid washes, scrubs and even resorted to taking it to a shipyard last year to see if they could remove the barnacle growth and stains. I was told by them to “drive it until it dies and then throw it out”, as it was so bad. Well, I have to say I am truly impressed – blown away actually. The ease at which it removed the stains and growth was truly impressive.” – Devon Greetham.

“To say I’m happy with how well this product works is an understatement. It looks like a new boat!!!!” – Paul McGee.

“I was sceptical but ordered it to try. My boat is 46 years old and had yellow stains on the hull and the top was dull and close to going powdery. It hasn’t looked this good in 15 years. I’ll use you product yearly now as the boat has sentimental value, but I also use it too often. I’m happy to supply photos if anyone doubts this product. I’ve never given feedback for anything but this deserved it. Thanks for the awesome product 👍” – Grant T.

“Just used mine on my boat and was blowed away on how easy it worked. No harsh rubbing just soft strokes and the yellow stains disappeared. Amazing.” – Damien W.

“I purposefully missed a spot next to my roller to see the difference. I am 100% satisfied with the outcome. Works brilliantly. No more yellow stains. I used less than a quarter of the deoxidiser. For my 21ft Seaswirl Striper. Waiting on my boat to dry and I’ll be using the finish fiberglass polish to freshen the sides up.” – Dominic C.

“Have tried other products on the market but, nothing has come close to this… amazed. I have pushed out this amazing product to my friends. Best product on the market” – Nigel C.

“I used this on my Lewis ski boat, it had a very stubborn Murray River stain on the hull. All the stain came out and left the hull looking like new, fantastic. Thank you, great product.” – Simon G.

“Very impressed 👏thanks peaks chemicals, been highly recommending👍”  – Darren L.

“Hey guys. Your product is amazing! Here’s a few before and after shots. Really happy with the outcome.” – Ben W.

“These products are absolutely incredible. Watch the colour change before your eyes.
Patches that I missed the first pass on the hull, had to spend another 2 minutes and redo it haha. I wish I had of taken the time to do some better before and after. I just got too excited. Very very happy customer 👌👌👌” – Elliot B.

To view our full marine range click HERE. 

Videos of our kit: